ess fan goggles ESS Profile TurboFan Goggles

ess fan goggles ESS Profile TurboFan GogglesOverview of the ESS Asian Fit Profile TurboFan 740 0132 Standard goggles were not built for every face. If your facial structure causes conventional goggle frames to gap, shift, or let humid air sneak past the seal, fogging becomes inevitable at exactly the wrong moment. The ESS Asian Fit Profile TurboFan (740 0132) solves that problem at its root. Built around Asian facial contours: Reduced lens curvature and extra thick OpFoam face padding create a

Overview of the ESS Asian-Fit Profile TurboFan | 740-0132

Standard goggles were not built for every face. If your facial structure causes conventional goggle frames to gap, shift, or let humid air sneak past the seal, fogging becomes inevitable at exactly the wrong moment. The ESS Asian-Fit Profile TurboFan (740-0132) solves that problem at its root.

Built around Asian facial contours:

• Reduced lens curvature and extra-thick OpFoam face padding create a tighter, more comfortable seal over Asian facial profiles
• A 13,000 rpm TurboFan actively exhausts humidity from inside the frame, stopping fog before it forms
• 2.8mm ClearZone FlowCoat polycarbonate lenses deliver ESSOPTICS distortion-free clarity with full UVA/UVB filtration
• The low-profile, night-vision-compatible frame fits MICH, ACH, FAST, and Ops-Core helmet systems without modification
• The rugged PowerPod runs up to 150 hours on a single AA battery

Whether you are a law enforcement officer, military operator, or security professional navigating hot, humid environments, the 740-0132 keeps your vision sharp through every hour of your shift.

Key Features

• Fan-Powered Anti-Fog System: A built-in 13,000 rpm TurboFan actively pushes humidity out of the goggle frame, dramatically reducing lens fogging in hot, sweaty, and high-exertion environments where passive venting falls short.
• Asian-Fit Frame Design: Reduced lens curvature and a specialized frame geometry are engineered to conform to Asian facial contours, improving both the comfort and the peripheral seal compared to standard-fit goggles.
• Extra-Thick OpFoam Face Padding: The OpFoam padding adds cushion and depth to create a full perimeter seal, reducing gaps that allow warm air and debris to reach the lens surface.
• 2.8mm ClearZone FlowCoat Polycarbonate Lenses: Lenses are 2.8mm thick for maximum impact resistance. The proprietary ClearZone FlowCoat treatment applies anti-scratch coating to the exterior surface and anti-fog coating to the interior surface for dual-sided protection.
• ESSOPTICS Distortion-Free Optics: Precision optical engineering delivers a clear, undistorted field of view across the entire lens surface, not just at center, supporting accurate threat and target identification.
• 100% UVA/UVB Protection: Both included lenses block 100% of UVA and UVB radiation, protecting your eyes during outdoor operations regardless of light conditions.
• Full-Perimeter Ventilation and Filtration: Beyond the fan, a perimeter filtration system helps minimize fogging and filters airborne particles that could compromise vision or eye health.
• Night-Vision-Compatible Frame: The low-profile design integrates with NVG mount systems without interference, making the 740-0132 mission-ready for day-to-night transitions.
• Patented Asian-Fit Outrigger Strap System: The specialized outrigger strap positions the goggle correctly against Asian facial contours and optimizes helmet strap routing for a stable, secure fit under load.
• PowerPod Battery System: The rugged PowerPod battery pack runs the TurboFan for up to 150 hours on a single AA battery. An auto-off timer prevents accidental battery drain between uses.
• Interchangeable Lenses via ESS Modular Technology: All lens components are individually replaceable. The 740-0132 accepts only ESS Asian-Fit Profile Series replacement lenses (available separately in Clear, Smoke Gray, and Hi-Def Yellow).
• Rx Insert Compatible: The frame accepts the ESS U-Rx and P-2B Rx prescription inserts for operators who require corrective lenses.
• Safety Standards Compliance: Meets or exceeds U.S. MIL SPEC MIL-PRF-32432, ANSI Z87.1-2015, CE EN166, and U.S. Federal OSHA requirements.
• Made in the USA: Manufactured domestically, supporting American production standards for military and public safety equipment.

Specifications

Compatibility

The ESS Asian-Fit Profile TurboFan 740-0132 is designed for full compatibility with the following helmet systems: MICH, ACH, LWH, CVC, FAST, Crye, and Ops-Core. The patented Asian-Fit Outrigger strap routes around helmet retention hardware for a stable, interference-free fit.

For prescription users, the frame accepts the ESS U-Rx and ESS P-2B Rx prescription inserts (sold separately).

Lens replacement: The 740-0132 accepts only ESS Asian-Fit Profile Series replacement lenses. Standard ESS Profile lenses from the non-Asian-Fit line are not interchangeable with this frame. Replacement lenses are available separately in Clear, Smoke Gray, and Hi-Def Yellow.

OTG use: This goggle is not designed for use over prescription eyeglasses. Operators who require corrective lenses should use the ESS U-Rx or P-2B Rx prescription inserts instead.

Not compatible with explosive atmospheres: This goggle has not been certified as Intrinsically Safe and must not be used in explosive atmospheres or in any environment where Intrinsically Safe devices are required.

Frame fit note: This is a purpose-built Asian-fit goggle, not a universal-fit design. Wearers who typically find standard goggles adequate should evaluate fit before purchasing. Contact WCUniforms with any questions before ordering.

Intended Users

The ESS Asian-Fit Profile TurboFan 740-0132 is built for any professional or serious user who needs a certified, fog-free field of view and wears helmets or other head-mounted protective systems in the course of their work.

Law enforcement officers operating in hot climates, during physical pursuits, or in breach-and-clear environments rely on the TurboFan's active anti-fog system to maintain the clear vision needed for split-second decisions. The helmet compatibility ensures the goggle integrates cleanly with tactical headgear rather than competing with it.

Military and special operations personnel appreciate the MIL-PRF-32432 compliance and NVG-compatible frame. The 150-hour battery life means one AA cell lasts through extended operations without resupply concerns.

Security professionals working outdoor posts, checkpoints, or in industrial environments with airborne particulates benefit from both the impact-rated lenses and the built-in filtration system that reduces particle exposure.

EMS and first responders who work in humid environments, including during water rescues or high-exertion calls, gain an extra layer of visual clarity that standard passive-vent goggles cannot reliably deliver.

Tactical shooters and range professionals who wear hearing protection or helmets at the range will find the low-profile frame clears muzzle-mounted optics and stays seated during rapid movement or extended strings of fire.

What's Included

• 1x ESS Asian-Fit Profile TurboFan Goggle Frame (Black)
• 1x Clear Lens (2.8mm Polycarbonate)
• 1x Smoke Gray Lens (2.8mm Polycarbonate)
• 1x PowerPod Battery Pack
• 1x AA Battery
• 1x Asian-Fit Outrigger Strap System

Not included: ESS Hi-Def Yellow replacement lens (available separately); ESS U-Rx and P-2B Rx prescription inserts (available separately). 

Available at WCUniforms

WCUniforms is a veteran-owned, law enforcement-operated specialty retailer focused exclusively on public safety, tactical gear, and professional uniforms. Unlike general sporting goods stores, every product in the catalog is selected with first responders, military professionals, and public safety operators in mind. The ESS Asian-Fit Profile TurboFan 740-0132 ships the same day from our warehouse, so your gear arrives when your mission requires it. Shop with confidence at wcuniforms.com, where professionals find the eyewear their departments and agencies trust. Unlike universal-fit goggles that leave Asian facial profiles underserved, the 740-0132 is the purpose-built solution for a clear, sealed fit.